Empowering growth through reliable lubrication.

SR HDX Multigrade 20W-40

• Excellent engine protection at high temperature
• Easy start-up under cold conditions
• Balanced all-round performance
• Suitable for all types of diesel & petrol engines

SR SG SAE 20W-50

Blended from high viscosity index base stocks with an additive package meeting the stated performance standards. Ideally suited to new-generation imported and Indian passenger cars running on petrol, and equally suitable for light-duty vans and trucks running on diesel.

SR LUBE SAE 15W-40

• Exceptional thermal & oxidation stability
• Outstanding viscosity-related performance
• Long drain periods
• Field proven up to 45,000 km drain intervals

SR SGX 15W-40

• Outstanding engine cleanliness & longer engine life
• Excellent lubrication across a wide temperature range
• Improved fuel economy
• Catalytic converter compatible

SR CI-4 PLUS Oil 15W-40

Provides excellent lubrication of today's diesel engines and promotes extended engine life. This extra high performance has been proven in the field across a wide variety of industries, applications and mixed fleets.

SR High Power 20W-40

Available on order. Full technical data sheet issued with quotation — please contact our technical desk for the current specification sheet.

SR Hydraulic Oil AW 32 – 460

Made from high viscosity index, chemically stable base stocks fortified with antioxidant, anti-corrosion, anti-wear and antifoam additives. They meet the requirements of very high-pressure systems and of systems where high pump speeds are encountered.

• Right viscosity for the pump and system design
• High viscosity index restricts viscosity change in service
• Good film strength & anti-wear protection for pumps, valves, cylinders, pistons
• Maximum demulsibility — entrained water settles out
• Excellent corrosion resistance against rusting of metal parts
• Foam resistance & high chemical stability for long service life

Recommended for hydraulic systems, enclosed gear boxes, chain drives, compressors, vacuum pumps, mining machinery, machine tools and circulation systems that do not require EP type lubricants.

SR HLP 22, 32, 46, 68

Premium hydraulic oils with outstanding anti-wear properties, oxidation stability and a high FZG rating, plus excellent resistance to thermal degradation and better hydrolytic stability. Developed for sophisticated hydraulic devices with hydro-mechanical actuators and for systems where oil is used for extended periods.

Recommended for sophisticated electro-hydraulic and numerically controlled systems, and for screw compressors — also approved by Ingersoll-Rand for their screw compressors. SR HLP 32 is approved by Voith India for hydraulic couplings and by L&T McNeil Ltd, Chennai for injection moulding machinery.

SR HLPP T 32, 46, 68

Premium hydraulic oils with outstanding lubrication characteristics and anti-wear properties, excellent thermal and oxidation stability and a very high FZG rating. Formulated with turbine oil base stocks for hydraulic systems requiring a very long-life lubricant of outstanding performance.

SR Hydraulic Oil 32, 46, 68, 100, 150

Blended from solvent refined mineral oils fortified with additives that impart excellent oxidation and rust inhibition properties. Good anti-rust performance means longer equipment life, lower maintenance cost and reduced downtime; good thermal and oxidation stability keeps deposits low, inhibiting oil thickening and saving power.

SR Waylube 68, P68, 220

Waylube 68 and 220 are recommended for slideway lubrication of planers, grinders, horizontal boring machines, shapers and jig borers involving high precision work, and for gear lubrication by oil can. Waylube P68 is a combined hydraulic and machine tool way lubricant with adequate lubricity to eliminate stick-slip and chatter under moderate load, while serving as hydraulic media in non-critical systems.

SR Spindle Oils 5, 12, 15, 22

• Good oil film strength
• Good demulsibility
• High chemical stability
• Lowest fluid friction
• Resistance to rusting and corrosion
• Approved by leading textile machinery makers — LMW, Textool, Texmaco

Recommended for lubrication of textile and machine tools, spindle bearings, timing gears, centrifugal separators, positive displacement blowers and the hydraulic systems of certain high precision machine tools.

SR Gear Oil EP 68, 100, 150, 220, 257, 320, 460, 680, 1000

Approved by ABB-ABL Projects for their equipment and recommended by major gear box manufacturers such as FMG and Shanti Gear Box. Recommended for heavy-duty enclosed gear drives operating under heavy or shock load conditions, plain and anti-friction bearings subjected to shock and heavy loads, and spray lubrication systems requiring extreme pressure properties. Dependable for continuous service at operating temperatures up to 110°C.

SR General Purpose Machinery Oils 32, 68, 100, 150, 220, 320, 460

Specially formulated with additives to improve adhesiveness and film strength characteristics. They show persistence of oil film to an unusual degree and have a marked influence in reducing power consumption, wear and maintenance costs. The N grades are developed for general purpose lubrication in steel mills, textile mills and machine tools.

SR Textile Oils — GP Oil TS 12, 68, 100, 220 & GP Oil C 32

Designed for lubrication of textile machinery with excellent scourability and superior tackiness, reducing the possibility of staining cloth at different stages of manufacture while minimising wear and protecting against rust and corrosion. Recommended for looms and other textile machinery where a scourable oil is preferred. GP Oil C 32 is a special grade for wick-fed twister rings, circular knitting machines, sewing machines, leather aprons and tapes.

Why SR cutting fluids

• No rusting or corrosion of machine, work piece or tool
• No discoloration or staining
• Do not smoke or fog in use
• No objectionable odour
• Do not decompose chemically in use
• Retain their physical properties in use
• Contain no ingredients harmful to the operator
• Higher metal removal rates in severe machining

SR Cutting 150 Plus

Emulsifiable in water — a blend of refined mineral oil base stocks, emulsifiers, additives and a suitable bactericide.

SR Metal Form 632

Contains additives which impart high oiliness as well as EP properties. Affords good cooling, chip flushing and penetration. Suitable for high speed automatic machine tools and may also be used as a general purpose machine tool lubricant.

SR Broaching Oil

The EP additives react chemically at elevated temperature to form a solid metallic film, extending broach life and improving surface finish. A robust product used successfully in machine shops where extreme lubrication quality is required in cutting operations — suitable even for machining the hardest materials.

SR Straight Cutting Fluids 14, 15, 16, 18

SR 15 is a very light coloured, low viscosity oil useful for machining all non-ferrous metals (except titanium) where a non-staining behaviour is required. Good heat transfer properties cool the tool and work piece effectively under the high speed conditions at which aluminium, magnesium, zinc and their alloys are machined; SR 15 is particularly suitable as a honing oil. SR 16 and 18 have higher viscosity than SR 15, with superior metal wettability and better cooling under increased operational severity. SR 18 is the most heavily compounded oil and meets IS 3065-1985 Type I, Grade II (reaffirmed 1990).

SR 20, 21, 23, 25

• SR 20 — light coloured, chlorinated EP additive; for honing, lapping and super-finishing of ferrous and non-ferrous metals in the automobile, bearing and watch industries.
• SR 21 — low viscosity, light coloured, chlorinated EP and oiliness additives; for mild, carbon, nickel and manganese steels, extendable to copper, aluminium and their alloys. Meets IS 3065-1985 Type I, Grade II (RA 1990).
• SR 23 — high oiliness plus EP; good cooling, chip flushing and penetration for high speed automatics. Meets IS 3065-1985 Type I, Grade II (RA 1990) and OILS ZX-6.
• SR 25 — higher oiliness additive than SR 23 with inactive sulphur; for multi-spindle lathes performing turning, honing, chamfering and similar operations.

SR Semi-Synthetic 220

Supplied as a concentrate to be diluted 2–4% in water. The resultant solution provides exceptional anti-rust and cooling properties in grinding and other high-speed machining operations, is highly resistant to bacterial attack and gives long life in use.

SR Quench 32, 40, 42, 43, 44

• Easier to control and give uniform hardness
• Suitable for large scale automation
• Non-corrosive and non-toxic
• Good thermal properties
• Good chemical and oxidation stability
• High boiling point, low volatility, high flash and fire points

SR Thermic 32

• Excellent oxidation & chemical stability
• Good heat transfer properties
• Low volatility, low vapour pressure
• Non-corrosive & non-toxic

SR Thermic 32S

• Withstands higher operating temperatures, up to 305°C
• Reduced oxidation and thermal degradation, hence longer life
• Minimal fouling and deposit formation on heat transfer surfaces
• Can replace imported synthetic products with minor system modifications

SR COM C 100, 150, 220, 320

Formulated with selected base stocks and a special compounding agent to give excellent resistance to the washing effect of water, further fortified with anti-rust and anti-corrosion agents, with good fluidity at low temperature. Recommended for cylinder lubrication of single and multistage air compressors with moist air, providing excellent lubrication of piston rings, valves and cylinder liners.

Why petroleum based rust preventives

• Non-staining
• Compatible with lubricating oils — film need not be removed
• Easily applied by brush, spray or swab
• Easily removable by solvent
• Economical compared to permanent treatments
• Wide application during storage and transportation

SR Rust 285, 286, 287, Rust S

Lubricating oils containing soluble corrosion inhibitors, generally applied by dipping, spraying or circulating. They serve as lubricants as well as temporary protectives and are suitable for internal protection of gear boxes, back axle assemblies, oil and fuel pumps and lines, fuel and oil tanks, IC engines and similar. Rust S is the most suitable grade for protection of cold rolled steel components, with very good coverage and best suited to humid and saline atmospheres.

SR Rust 387, 388

Soft, waxy solids at room temperature containing no solvent; the base materials are oil with additives such as wax, lanolin and petroleum sulphonates. The rust preventive is melted for application. Suitable for highly finished as well as normal machined surfaces, and applicable to many types of assemblies by hot dipping — piston assemblies, oil seals, transmissions and timing chains, single items such as milling cutters, plain bearing inserts and highly finished gauges.

SR Rust 173, 184, 274, 276

Mobile liquids consisting of film forming ingredients, rust inhibitors and water displacing additives in solvent; on evaporation of the solvent a thin, soft film is obtained. Rust 173 and 274 contain water-displacing additives, so all traces of moisture on the component surface are displaced by the protective film. Rust 184 and 173 are used on a wide range of single items and on interior surfaces where elaborate protection is unnecessary, and in certain cases for interim protection of assemblies — because solvent evaporation is required, they should not be used where small-orificed cavities occur.

Rust 274 is a premium rust preventive specially designed as a protective for all types of bearings, protecting components for extended duration. It is also used as a sealant for phosphatized components and can serve both inter-process treatment and final packing of precision parts; for final application it is used as such, while it can be diluted with mineral turpentine to cut costs for inter-process treatment. Applied by spray or cold dip.

Rust 276 is a superior quality rust preventive blended with solvent refined base oil and special additives for extended protection periods, offering better water displacement and protecting metal surfaces in severe salty and humid atmospheres. Recommended for final packaging of finished components and equally suitable for inter-process waiting periods; applied by spray, swab or cold dip.

SR RP 70 & SR RP 140

Inhibited with special additives to ensure protection against rusting. The oil forms an oily film over the work piece when applied by dipping or spraying, and can be removed easily with petroleum solvent, by alkaline cleaning or by vapour degreasing. Used for indoor storage during in-between operations and short-term storage before wrapping; also for short-term outdoor storage and protection of black sheets during storage and transportation in steel plants. Both are recommended for internal protection of engines and machinery where removal of the oil film is difficult — the film formed is compatible with lubricating oils.

SR Lithium 2, 3, EP 1, EP 2

Excellent water resistance, high oxidation stability and maximum structural stability with superior anti-rust and anti-corrosion properties. They meet the requirements of all industrial grease applications for plain and anti-friction bearings. The EP grades add shear stability and high load carrying capacity, and are recommended where an extreme pressure multipurpose grease is dictated.

SR Lithium M2 & Lithium Complex 1, 2, 3

Lithium M2 is a lithium base multipurpose grease containing molybdenum disulphide, which makes it suitable for applications where fretting corrosion may be a problem, such as the lubrication of splined shafts.

Lithium Plex 2, 3 are lithium base complex greases developed for ball and roller bearing lubrication where long life and trouble-free performance are key. They possess outstanding oxidation and mechanical stability, water resistance and rust protection. Their exceptionally high dropping point, over 260°C, gives excellent resistance to leakage, dripping and throw-off at elevated operating temperatures — suitable for high temperature applications up to 190°C.

SR MP Grease 2, 3 & EP 000, EP 00, EP 0, EP 1, EP 2

The SR drawing oil range

• Drawing Oil 220 — stable, non-staining refined petroleum oil blended with fatty oils to improve wetting; good cooling ability, recommended for aluminium wire drawing.
• Drawing Oil 221 — cream coloured paste, miscible with water and mineral oil, with inert fillers giving the film strength required for heavy draws on carbon/alloy steel; best as a coolant in wire/tube drawing of steel and usable in pressing.
• Drawing Oil 44 — non-staining, water-soluble cream paste for "dry on" or emulsion application; a balanced soap-and-fat mixture, especially effective as a coolant in wire drawing at 1–5% dilution depending on wire gauge. Also useful in deep drawing of automotive bodies and metal sheets.
• Drawing Oil 66 — dark coloured blend of refined high viscosity petroleum oil with a special additive to withstand the high temperatures of die forging operations; easily spray applied.

SR Mould 50 & Mould 150

Blended from straight mineral base stocks and available in different viscosity grades. These oils can also be used as a fluid sealing medium for gas holders where the gas is non-reacting with mineral oil, and as filter media in oil bath type air cleaners. Lower viscosity mill oil can be used to clean internal surfaces of equipment and accessories, and these grades are also used for lubrication in textile and jute mills.

SR Ball Pen Machine Oil

SR Rubber Process Oils

Rubber process oils are broadly classified into three basic groups depending on the physical arrangement of the carbon atoms — paraffinic, naphthenic and aromatic. All petroleum oils are mixtures of various hydrocarbon groups and their classification is based on the predominance of a particular group. SR Rubber Oil 165, 205 and 255 are predominantly paraffinic process oils suitable for use as plasticizers; 165 and 255 are highly paraffinic.

By pinion speed & power transmitted

By running speed

While lubricating oils are best suited for the lubrication of any machine element, their use is not feasible where the product is likely to leak out and not remain in the bearing over extended periods of service. For such situations, solid to semi-solid dispersions of thickening agents in liquid lubricants — greases — are used. SR greases are the outcome of many years of technical and scientific experience: the petroleum lubricating oils used in their manufacture are carefully selected to give excellent lubricating characteristics, and modern equipment, scientifically developed formulae, careful supervision and accurate controls ensure a complete range of greases of proven quality for modern industrial machines.